音声ブラウザご使用の方向け: SKIP NAVI GOTO NAVI

ECONOMIC AND SOCIAL COMMISSION FOR ASIA AND THE PACIFIC

Making polypropylene braces.

PRODUCTION AND DISTRIBUTION OF
ASSISTIVE DEVICES
FOR PEOPLE WITH DISABILITIES



Supplement III:

Technical Specifications




United Nations logo.

UNITED NATIONS
New York, 1997


ST/ESCAP/1774

UNITED NATIONS PUBLICATION
Sales No. E.98.II.F.7
Copyright © United Nations 1997
ISBN: 92-1-119775-9

The designations employed and the presentation of the material in this publication do not imply the expression of any opinion whatsoever on the part of the Secretariat of the United Nations concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries.

Mention of firm names and commercial products does not imply the endorsement of the United Nations.

This document has been issued without formal editing.


CONTENTS

INTRODUCTION

I. Prostheses and Orthoses

  1. Basic tools and machines required in a small workshop
  2. Basic materials required for production
  3. Notes on making a patellar-tendon-bearing (PTB) prosthesis
  4. Illustrated notes on making the Jaipur Foot
  5. Illustrated notes on making the Jaipur Below-Knee Prosthesis
  6. General maintenance tips for prostheses
  7. Nevedac prostheses
  8. Summary analysis of prosthetic feet available in Thailand
  9. Prescribing and fitting orthoses
  10. Producing a plastic orthosis
  11. Illustrated notes on making polypropylene braces
  12. Illustrated notes on making a foot-drop splint
  13. Illustrated notes on making a Mukti limb

II. Wheelchair

  1. Main steps in making a wheelchair
  2. Illustrated notes on making a Handicap International (HI) wooden wheelchair
  3. Illustrated notes on how to make a wooden wheel
  4. Adjustments on wheelchairs
  5. General maintenance tips
  6. Battery-operated wheelchair
  7. Ground mobility device

III. Other Devices for People with Mobility Difficulties

  1. Illustrated notes on making a crutch
  2. Illustrated notes on making a simple hand grip
  3. Illustrated notes on making a stick reacher
  4. Illustrated notes on making a panty-type urinal kit
  5. Design of a swivel spoon
  6. Design of a pronged-handle spoon
  7. Hand-control driving system

IV. Appropriate Paper-Based Technology (APT)

  1. APT Definition and Characteristics
  2. Materials and tools used in APT
  3. Basic steps used in APT

V. Special seating

  1. Best guide and best seat
  2. Using paper and other materials to make special seats
  3. Special seating on wheels
  4. Recycling a rubber tyre into a swing

VI. Hearing Aids

  • Maintenance tips

Photo Credit

Credit Due
Centre for the Rehabilitation of the Paralysed (CRP), Savar, Bangladesh
New Polytechnic, Kolhapur, India
San Yuenwah, Social Development Division ESCAP
D.S. Vohra, Nevedac Prosthetic Centre, Chandigarh, India
Yann Drouet, Handicap International - Thailand

Illustration Credit

Credit Due
David Werner, HealthWrights, Palo Alto, U.S.A.

ECONOMIC AND SOCIAL COMMISSION FOR ASIA AND THE PACIFIC
Production and distribution of assistive devices for people with disabilities: Supplement3
- Contents -

ST/ESCAP/1774

UNITED NATIONS PUBLICATION
Sales No. E.98.II.F.7
Copyright © United Nations 1997
ISBN: 92-1-119775-9