Alphabetical List of Authors
- A Speech Recognition System for Operation of a Visual Inspection Workstation
Adams, T.C .
- Seated Postural Stability of Wheelchair Passengers in Motor Vehicles
- Transportation Needs: Survey of Individuals with Disabilites
Almeyda, J.W.
- System to Evaluate Paralyzed Lower-Limb Muscle Performance during FES-Induced Contractions
- A Development System to Enhance FES Leg Cycle ErgometerTechchnology
- Improving FES-Leg Cycle Ergometer Performance in Individuals Who have Plateaued during Long-Term Training
- Determination of Static Stability of Manual Prone Carts
- Internet and Assistive Technology: Local Community Network
- $80,000 Workstation with No-Cost Accessibility
Andrews, B.J.
- Control of Neuralprostheses I: Sensor Fusion
- Control of Neuralprostheses I: Event Detection using Machine Learning
- Control of Neuralprostheses III: Self Adaptive Neuro-Fuzzy Control Using Reinforcement Learning
- Surveying Satisfaction of Integrated Control Users
- The Relationship Between the Angle of Camber and the Tracking Misalignment of Manual Wheelchairs
- Recycling for the 22nd Century
Ashlock, G.
- A Comparison of Inpatient and Outpatient Rehabilitation Engineering Services in an Acute Rehabilitation Setting
- A Computer-Based Environmental Control System
- Control of Neuralprostheses I: Event Detection Using Maching Learning
- A Retrospective Study of the Use and Abandonment of Assistive Devices Developed by Student Design Projects
Axelson, P.W.
- The Universal Trail Assessment Process
- Design Specifications for Outdoor Recreation Access Routes and Recretation Trails - A Pilot Study
- Draft Test Method for the Measurement of Surface Accessibility
- Modeling Effects of Inertial Reactions on Occupants of Moving Power Wheelchairs
Barner, K.E.
- Telementoring and Collaborative Learning for Students with Diabilites
- Design of a Haptic Graphing System
- Towards Automatic Generation of Tactile Graphics
- Technology Transfer: The Virtual Product Model
- A Quantitative Head Position Measurement Technique for the Evaluation of Torticollis
Beitler, M.
- Bus Stop Locator: An Application of Audible Signage Technology
- Detection of Event-Related Potentials as the Basis for a Direct Brain Interface
- The Affects of Securement Point Location on Wheelchair Crash Response
Bezt, R.R.
- The Comparison of FES to Orhtoses for Upright Mobility in Children and Adolescents with Spinal Cord Injuries
- A Portable 24 Channel Functional Electrical Stimulation System for Upperand Lower Ectremity Applications
- 25 Years of Clinical Experiences in Using FES by Hemiplegic Patient-Praticed in the Ljubljana Rehabilitation Institute
- Design Development of a New Manual Prone Cart
Boninger, M.L.
- Joint Kinematics during Wheelchair Propulsion
- Manual Wheelchair Ride Comfort
- Kinematic Characterization of Wheelchair Propulsion
- Detection of Event-Related Potentials as the Basis for a Direct Brain Interface
- The Effect of Shape Factors in Wheelchair Cross Brace Strength
- Managing Legal Liabilities and Risks Inherent in the Delivery of Assistive and Rehabilitation Technology Services and Devices
Brienza, D.M.
- A System for the Design and Analysis of Seat Support Srfaces
- Evaluation of a Surface Shape Optimization Technique for Custom Contured Cushion Design
Brubaker, C.E.
- A System for the Design and Analysis of Seat Support Surfaces
- Evaluation of a Surface Shape Optimization Technique for Custom Contoured Cushion Design
- Comparison of Oxygen Uptake and Physiologic Cost Index (PCI) at Submaximal Walking Velocities
- The Relationship Between the Angle of Camber and the Tracking Misalignment of Manual Wheelchairs
- Quality of Life Improvement with Vibrations
- Quality of Life Improvement with Vibrations
- Multimodally Controlled Intelligent Assistive Robot
Cheng, D.P.K
- Using an LB301/LB201 Long Range Laser Displacement Sensor for Shape Sensing of a Black Rubber Molding Bead Bag
- PC-Based Communication Board Simulator for Teaching
- Cushion Using Natural Materials - A Preliminary Study Using the Leaves of the Yau Kam Chi Tree
Chesney, D.A.
- The Universal Trail Assessment Process
- Design Specifications for Outdoor Recreation Access Routes and Recreation Trails - A Pilot Study
- Draft Test Method for the Measurement of Surface Accessibility
- Multimodally Controlled Intelligent Assistive Robot
- A Low Cost Goniometer for Clinical Gait Assessment in Rehabilitation
- Evaluation of a Surface Shape Optimization Technique for Custom Contoured Cushion Design
- Coating Stainless Steel Electrodes with Iridium for Applications in FES
- Development System to Enhance FES Leg Cycle Ergometer Technology
Connell, B.R.
- Development and Validation of Principles of Universal Design
- The Role of Individuals with Disabilites,Family Members, and Providers inthe Home Modification Process in Rural North Carolina
- A Proposed Low Cost Cushion Design for Individuals with Spinal Cord Injury in Developing Countries
Cooper, R.A.
- Joint Kinematics during Wheelchair Propulsion
- Manual Wheelchair Ride Comfort
- Three-Dimensional Kinematic Analysis of Racing Wheelchair Propulsion
- Kinematic Characterization of Wheelchair Propulsion
- Single Point Center of Pressure for Wheelchair Propulsion
- The Effect of Shape Factors in Wheelchair Cross Brace Strength
- Occupational Rehabilitation Center
Cors, M.
- Determination of Static Stability of Manual Prone Carts
- Design Development of a New Manual Prone Cart
Couch, W.P.
- A System to Evaluate Paralyzed Lower-Limb Muscle Performance during FES-Induced Contractions
- A Development System to Enhace FES Leg Cycle Ergometer Technology
- Potential Problems Associated with Use of Speech Recognition Products
- Crutch-Like Transfer Block
Dallaway, J.L.
- Human-Computer Interaction within Robotic Workstations
- Sensor-Based Shared Control of Rehabilitation Manipulation System
- Functional Impact of Assistive Technology on People with Hemiplegia from Stroke
Demasco, P.W.
- A Preliminary Study into Schema - Based Access and Organization of Reusable Text in AAC
- A Pilot Study for Multimodal Input in Computer Access
- Assistive Technology On-Line: A World Wide Web Server for Assistive Technology
- Dr. Gait III - A System for Gait Analysis
- User Satisfaction of Computer-Based Training in Assistive Technology
- Lift Assist Device
- When Wheelchairs Tip Backwards Beyong their Stability Limits
- A Portable 24 Channel Functional Electrical Stimulation System for Upper and Lower Exremeity Applications
- AssistiveTrunk Loading Wheelchair Lift
- A Pilot Study for Multimodal Input in Computer Access
- Direct Bladder Stimulation in an Animal Model: Evaluation of a New Suture Electrode
- Accelerometric Motion Analysis of Balance-Impaired Elderly Subjects
- User Satisfaction of Computer-Based Training in Assistive Technology
- A Quantitative Head Position Measurement Technique for the Evaluation of Torticollis
- Independent Rider
- Design of a Hand Extention Exerciser
Fee Jr., J.W.
- Mathematical Modeling and Optimization: Demonstrating Changes in the Tone of Those with Cerebral Palsy
- Design Activity in the Consumer Innovation Laboratory
- Door-Opening Device for Wheelchair Users
- Continuous Quality Improvement of Rehabilitation Technology Services in Vocational Rehabilitation Agencies
- Lift Assist Device
Foulds, R.A.
- Computer Recognition of Dynamic Gestures for Use in Augmentative Communication
- Multimodally Controlled Intelligent Assistive Robot
- Design of a Haptic Graphing System
- Method of Controlling A/K Prosthesis for Asending with Disabled Side Hip Joint Torque
- Forward Dynamic Stability Test for Manual Wheelchairs
- Computer Aided Wheelchair Prescription System (CAWPS)
- Using Electronic Meeting Software as a Planning Tool for Asssistive Technology Service Delivery to Infants and Toddlers
- Recycling for 22nd Century
- Quality Management Certification to ISO 9001: Experiences of a Rehabilitation Engineering Service
- Deaf-Blind Users Grasp the Idea with Dexter, a Prototype Robotic Fingerspelling Hand
- Portable Seating Orthosis for an Adult Ambulatory Scoliosis Patient
Glaser, R.M.
- A System to Evaluate Paralyzed Lower-Limb Muscle Performance during FES-Induced Contractions
- A Development System to Enhance FES Leg Cycle Ergometer Technology
- Improving FES-Leg Cycle Ergometer Performance in Individuals Who have Plateaued during Long-Term Training
- Door-Opening Device for Wheelchair Users
- 25 Years of Clinical Experience in Using FES by Hemiplegic Patient-Practiced in the Ljubjana Rehabilitation Institute
Gonzalez, J.
- Manual Wheelchair Ride Comfort
- A Proposed Low Cost Cushion Design for Individuals with Spinal Cord Injury in Devleoping Countries
- The Effect of Shape Factors in Wheelchair Cross Brace Strength
- Customizing Adaptations for Job Development: A Case Study
- Bus Stop Locator: An Application of Audible Signage Technology
- The Role of Individuals with Disabilities, Family Members, and Providers in the Home Modification Process in Rural North Carolina
- A Proposed Low Cost Cushion Design for Individuals with Spinal Cord Injury in Developing Countries
- Occupational Rehabilitation Center
Hamilton, E.J.
- Design Specifications for Outdoor Recreation Access Routes and Recretation Trails - A Pilot Study
- Draft Test Method for the Measurement of Surface Accessibility
- Customizing Adaptations for Job Development: A Case Study
- The Standards Process as a Route to Universal Design in Telecommunications: The Case of V.18
- Quality Management Certification to ISO 9001: Experiences of a Rehabilitation Engineering Service
- Development of a User Interface for a Total Support Wheeled Walker
Harwin, W.S.
- The Assistive Technology Chicago Project: Preliminary Cost/Benefit Results
Hefzy, M.S.
- A Proposed Low Cost Cushion Design for Individuals with Spinal Cord Injury in Developing Countries
- Independent Rider
- Safety Issues Kinesthetic Interfaces in Assistive Robotics
- A Comparison of Inpatient and Outpatient Rehabilitation Engineering Services in an Acute Rehabilitation Setting
- An Affordable Mobile Robotic Manipulator
- Proposed Low Cost Cushion Design for Individuals with Spinal Cord Injury in Developing Countries
- The Affects of Securement Point Location on Wheelchair Crash Response
- Design Development of a New Manual Prone Cart
- A Retrospective Study of the Use and Abandonment of Assistive Devices Developed by Student Design Projects
Hooyenga, K.
- Forward Dynamic Stability Test for Manual Wheelchairs
- Telementoring and Collaborative Learning for Students with Disabilities
- A Speech Recognition System for Operation of a Visual Inspection Workstation
- Detection of Event-Related Potentials as the Basis for a Direct Brain Interface
- A Portable 24 Channel Functional Electrical Stimulation System for Upper and Lower Extremity Applications
- Crutch-Like Transfer Block
- $80,000 Workstation with No-Cost Accessibility
- 25 Years of Clinical Experiences in Using FES by Hemiplegic Patient-Practiced in the Ljubljana Rehabilitation Institute
Janssen, T.W.J.
- A System to Evaluate Paralyzed Lower-Limb Muscle Performance during FES-Induced Contractions
- A Development System to Enhance FES Leg Cycle Ergometer Technology
- Improving FES-Leg Cycle Ergometer Performance in Individuals Who have Plateaued during Long-Term Training
- Custom Orientation: Key to Delivering Useful Assistive Devices
- Simplified Strength Testing of Manual Wheelchairs in Developing Countries
- Internet and Assistive Technology: Local Community Network
- Developing a Database for a Salvia Control Clinic
- Internet and Assistive Technology: Local Community Network
Jones, M.L.
- Development and Validation of Principles of Universal Design
- Accessibility Requirements for Ramp Slope: Results of Human Subjects Testing
- Modeling the Effects of Inertial Reactions on Occupants of Moving Power Wheelchairs
- Potential Problems Associated with Use of Speech Recognition Products
Kamper, D.G.
- Seated Postural Stability of Wheelchair Passengers in Motor Vehicles
- Transportation Needs: Survey of Individuals with Disabilities
Karg, T.E.
- A System for the Design and Analysis of Seat Support Surfaces
- Evaluation of a Surface Shape Optimization Technique for Custom Contoured Cushion Design
- Multimodally Controlled Intelligent Assistive Robot
- Accelecrometric Motion Analysis of Balance-Impaired Elderly Subjects
- Language Arts Keyboard Overlays for Students with Disabilities
- Art Making and Assistive Devices
- Lift Assist Device
- When Wheelchairs Tip Backwards Beyond their Stability Limits
- A Speech Recognition System for Operation of a Visual Inspection Workstation
- 25 Years of Clinical Experiences in Using FES by Hemiplegic Patient-Practiced in the Ljubljana Rehabilitation Institute
- The Keyboard Channel as an Invisible Command Path for Alternate Input Devices
- Valuing Assistive Technology Inventions
- Control of Neuralprostheses I: Sensor Fusion
- Adding User Programmability to a Dedicated Augmentative Communication Device
- Detection of Event-Related Potentials as the Basis for a Direct Brain Interface
- Self-Catheterization Aids for Disabled Females
Lane, J.P.
- Technology Transfer via Invention Review: A Progress Report
- Custom Orientation: Key to Delivering Useful Assistive Devices
- Consumer Criteria for Assistive Devices: Operationalizing Generic Criteria for Specific ABLEDATA Categories
- Technology Transfer: The Virtual Product Model
- Comparison of Costs Involved in Making Worksite Accomodations
Lawrence, B.
- Technology Transfer via Invention Review: A Progress Report
- Self-Catheterization Aids for Disabled Females
- Assistive Trunk Loading Wheelchair Lift
- Implementation of a Comprehensive Assistive Technology Service Delivery Program as a Hub of a Regional Network of AT Services
- A Low Cost Goniometer for Clinical Gait Assessment in Rehabilitation
Levine, S.P.
- A Comparison of Inpatient and Outpatient Rehabilitation Engineering Services in an Acute Rehabilitaiton Setting
- A Computer-Based Environmental Control System
- Detection of Event-Related Potentials as the Basis for a Direct Brain Interface
- A System for the Design and Analysis of Seat Support Surfaces
Linden, M.A.
- Seated Postural Stability of Wheelchair Passengers in Motor Vehicles
- Transportation Needs: Survey of Individuals with Disabilities
- Recycling for the 22nd Century
- 25 Years of Clinical Experiences in Using FES by hemiplegic Patient-Practiced in the Ljubljana Rehabilitation Institute
- Design of a Universal Switch Mount
- Coating Stainless Steel Electrodes with Iridium for Applications in FES
- Custom Silicon Chip Technology for Implantable FES Microsimultors
- The Universal Trail Assessment Process
- Job Responsibilities of Rehabilitation Engineers in Vocational Rehabilitation Agencies
- A Technology Curriculum Strand
Lysack, J.T.
- Designing a Short-Range Wheeled Mobility Device for Women in India
- Collecting Data in a Developing Country
- Development and Validation of Principles of Universal Design
- Techniques for Measuring Lumbar Curvature and Lumbar Shape of the Spine: A Literature Review
- When Wheelchairs Tip Beyond their Stability Limits
- The Powered Easel
Mahoney, R.M.
- Telementoring and Collaborative Learning for Students with Disabilities
- Consumer Evaluation of Power Feeding Devices
- Design Activity in the Consumer Innovation Laboratory
- Virtual Prototyping of Rehabiliatation Aids
- Single Switch Mouse Control Interface
Malassigne, P.
- Light/Dark-Adapting Eyewear for Persons with Low Vision
- Door-Opening Device for Wheelchair Users
- Occupational Rehabilitation Center
- Improving FES-Leg Cycle Ergometer Performance in Individuals Who have Plateaued during Long -Term Training
- Orthotics, Prosthetics and Assistive Technology in Cochabamba, Bolivia
- A Preliminary Study into Schema-Based Access and Organization of Reusable Text in AAC
- Quality Management Certification to ISO 9001: Experiences of a Rehabiliation Engineering Service
- Sensor-Based Shared Control of a Rehabilitation Manipulation System
- A Portable 24 Channel Functional Electrical Stimulation System for Upper and Lower Extremeity Applications
- Custom Silicon Chip Technology for Implantable FES Microstimulators
- Valuing Assistive Technology Inventions
- Desing Development of a New Manual Prone Cart
- Computer Recognition of Dynamic Gestures for Use in Augmentative Communication
- Consumer Criteria for Assistive Devices: Operationalizing Generic Criteria for Specific ABLEDATA Categories
- Toward a Multimodal Environment for Learning Robot Manipulation by People with Severe Disabilities
- Increased Independence for Farmers with a Physical Disability
- Bus Stop Locator: An Application of Audible Signage Technology
- Quality Management Certification to ISO 9001: Experiences of a Rehabilitation Engineering Service
- Portable Seating Orthosis for an Adult Ambulatory Scoliosis Patient
- Single Switch Mouse Control Interface
- The Comparison of FES to Orthoses for Upright Mobility in Children and Adolescents with Spinal Cord Injuries
- Development and Validation of Principles of Universal Design
Mulcahey, M.J.
- The Comparison of FES to Orthoses for Upright Mobility in Children and Adolescents with Spinal Cord Injuries
- A Portable 24 Channel Functional Electrical Stimulation System for Upper and Lower Extremity Applications
Mulholland, S.J.
- Designing a Short-Range Wheeled Mobility Device for Women in India
- Collecting Data in a Developing Country
- Development and Validation of Principles of Universal Design
- The Comparison of FES to Orthoses for Upright Mobility in Children and Adolescents with Spinal Cord Injuries
- The Keyboard Channel as an Invisible Command Path for Alternate Input Devices
- An Integration Implementation Using an M3S Infrastructure with Considerations for Users, Prescribers and Developers
Nelson, A.L
- Determination of Static Stability of Manual Prone Carts
- Design Development of a New Manual Prone Cart
- Crutch-Like Transfer Block
- Quality of Life Improvement with Vibrations
- Three-Dimensional Kinematic Analysis of Racing Wheelchair Propulsion
- Adapting and Designing Products for Persons with Disabilities
- Development of a Common Language to Design a Tricycle for Physically Impaired Persons in Developing Countries
- A Compliant Seating System for a Child with Extensor Spasms
- Direct Bladder Stimulation in an Animal Model: Evaluation of a New Suture Electrode
- Development and Validation of Principles of Universal Design
- Control of Neuralprostheses I: Sensor Function
Packer, T.L.
- Designing a Short-Range Wheeled Mobility Device for Women in India
- Collecting Data in a Developing Country
- Designing a Short-Range Wheeled Mobility Device for Women in India
- The Universal Trail Assessment Process
- A Quantitative Head Position Measurement Technique for the Evaluation of Torticollis
- A Pilot Study for Multimodal Input in Computer Access
- A Preliminary Study into Schema-Based Access and Organization of Reusable Text in AAC
- Jester - A Head Gesture Recognition System for Windows 95
- Forward Dynamic Stability Test for Manual Wheelchairs
Phalangas, A.
- Consumer Evaluation of Powered Feeding Devices
- Assistive Technology On-Line: A World Wide Web Server for Assistive Technology
- A User Accessible Rear Mounted Storage Device for Wheeled Mobility Users
- North Carolina's Assessment of Assistive Technology Needs for Infants,Toddlers, and Preschoolers with Disabilities
Pringle, D.D.
- A System to Evaluate Paralyzed Lower-Limb Muscle Performance during FES-Induced Contractions
- A Development System to Enhance FES Leg Cycle Ergometer Technology
- Improving FES-Leg Cycle Ergometer Performance in Individuals Who have Plateaued during Long-Term Training
- Assistive Technology On-Line: A World Wide Web Server for Assistive Technology
- Body Powered Rehabilitation Robot
- Job Accomodation for Repetitive Strain Injury on the Automobile Assembly Line
Reger, S.I.
- Seated Postural Stability of Wheelchair Passengers in Motor Vehicles
- Transportation Needs: Survey of Individuals with Disabilities
- Design of a Hand Extension Exciser
- Coating Stainless Steel Electrodes with Iridium for Applicationsin FES
Robertson, R.N.
- Joint Kinematics during Wheelchair Propulsion
- Manual Wheelchair Ride Comfort
- Three-Dimensional Kinematic Analysis of Racing Wheelchair Propulsion
- Kinematic Characterization of Wheelchair Propulsion
- Detection of Event-Related Potentials as the Basis for a Direct Brain Interface
- The Effect of Shape Factors in Wheelchair Cross Brace Strenght
- Toward a Multimodal Environment for Learning Robot Manipulation by People with Severe Disabilities
- The Relationship Between the Angle of Camber and the Tracking Misalignment of Manual Wheelchairs
- Detection of Event Related Potentials as the Basis for a Direct Brain Interface
- Audible Indicator for Guitar Tuner
Rosen, M.J.
- Modeling the Effects of Inertial Reactions on Occupants of Moving Power Wheelchairs
- Job Accomodation for Repetitive Strain Injury on the Automobile Assembly Line
Ross, D.A.
- Light/Dark-Adapting Eyewear for Persons with Low Vision
- Personal Freedom: A Wearable Interactive Universal Access Device
- The Role of Device Loan in Procurement of Appropriate Assistive Technology for Vocational Rehabilitation
- The Powered Easel
- Accelerometric Motion Analysis of Balance-Impaired Elderly Subjects
- Design of a Universal Switch Mount
Salganicoff, M.
- Multimodally Controlled Intelligent Assistive Robot
- Safety Issues for Kinesthetic Interfaces in Assistive Robotics
- A Body Powered Rehabilitation Robot
Sanford, J.A.
- Development and Validation of Principles of Universal Design
- Accessibility Requirements for Ramp Slope: Results of Human Subjects Testing
- Design of a Hand Extension Exerciser
- A Proposed Low Cost Cushion Design for Individuals with Spinal Cord Injury in Developing Countries
- Customizing Adaptations for Job Development: A Case Study
- Making Mathematicsand Science Accessible to Blind Students through Technology
- $80,000 Workstation with No-Cost Accessiblity
- Design Development of a New Manual Prone Cart
- Managing the Legal Liabilities and Risks Inherent in the Delivery of Assistive and Rehabilitaiton Technology Services and Devices
- Detection of Event-Related Potentials as the Basis for a Direct Brain Interface
- Custom Silicon Chip Technology for Implantable FES Microstimulators
- Quality Management Certification to ISO 9001: Experiences of a Rehabilitation Engineering Service
- Individualized Video-Based Stroke Rehabilitation Home Program
- Technology Transfer: The Virtual Product Model
Shapcott, N.
- Computer Aided Wheelchair Prescription System (CAWPS)
- A Proposed Low Cost Cushion Design for Individuals with Spinal Cord Injury in Developing Countries
- The Keyboard Channel as an Invisible Command Path for Alternate Input Devices
Shimada, S.D.
- Joint Kinematics during Wheelchair Propulsion
- Kinematic Characterization of Wheelchair Propulsion
- Single Point Center of Pressre for Wheelchair Propulsion
- Design of a Universal Switch Mount
- The Relationship Between the Angle of Camber and the Tracking Misalighnment of Manual Wheelchairs
- Dr. Gait III - A System for Gait Analysis
- A Computer-Based Environmental Control System
- Potential Problems Associated with Use of Speech Recognition Products
- Lift Assist Device
- A Pilot Study for Multimoda Input in Compuer Access
Smith, B.T.
- The Comparison of FES to Orthoses for Upright Mobility in Children and Adolescents with Spinal Cord Injuries
- A Portable 24 Channel Functional Electrical Stimulation System for Upper and Lower Extremeity Applications
- Dr. Gait III -A System for Gait Analysis
- Dr. Gait III -A System for Gait Analysis
- Functional Impact of Assistive Technology on People with Hemiplegia from Stroke
- Language Arts Keyboard Overlays for Students with Disabilities
- 25 Years of Clinical Experiences in Using FES by Hemiplegic Patient-Practiced in the Ljubljana Rehabilitation Institute
- Development and Validation of Principles of Universal Design
- Quality of Life Improvement with Vibrations
Story, M.F.
- Development and Validation of Principles of Universal Design
- Accessibility Requirements for Ramp Slope: Results of Human Subjects Testing
- A Body Powered Rehabilitation Robot
- Custom Silicon Chip Technology for Implantable FES Microstimulators
- A Low Cost Goniometer for Clinical Gait Assessment in Rehabilitation
- Individualized Video-Based Stroke Rehabilitation Home Program
Tam, E.W.C.
- Technical Considerations for Integrating Ventilators with Manual Wheelchairs
- A Low Cost Goniometer for Clinical Gait Assessment in Rehabilitaiton
- A Comparison of Inpatient and Outpatient Rehabilitation Engineering Services in an Acute Rehabilitation Setting
- State-Level Assistive Technology Associations: Cooperation and Collaboration on a Local Level
- Bus Stop Locator: An Application of Audible Signage Technology
- Self-Catheterization Aids for Disabled Females
- Control of Neuralprostheses III: Self Adaptive Neuro-Fuzzy Control Using Reinforcement Learning
- Bus Stop Locator: An Application of Audible Signage Technology
- Door-Opening Devices for Wheelchair Users
- North Carolina's Assessment of Assistive Technology Needs for Infants,Toodlers, and Preschoolers with Disabilities
- Surveying Satisfaction of Integrated Controls Users
- Art Making and Assistive Devices
- Initial Assessment of Individuals with Severe Cognitive Disabilities for Augmentative Communication
- Accelerometric Motion Analysis of Balance-Impaired Elderly Subjects
- Custom Silicon Chip Technology for Implantable FES Microstimulators
- The Role of Individuals with Disabilities, Family Members, and Providers in the Home Modification Process in Rural North Carolina
Usiak, D.J.
- Cutom Orientation: Key to Delivering Useful Assistive Devices
- Consumer Criteria for Assistive Devices: Operationalizing Generic Criteria for Specific ABLEDATA Categories
- Development of Tricycle Production (DTP) in Developing Countries
- Individualized Video-Based Stroke Rehabilitation Home Program
- Development and Validation of Principles of Universal Design
- A Preliminary Study into Schema-Based Access and Organization of Reusable Text in AAC
VanSickle, D.P.
- Manal Wheelchair Ride Comfort
- Single Point Center of Pressure for Wheelchair Propulsion
- The Effect of Shape Factors in Wheelchair Cross Brace Strength
- An Integration Implementation Using an M3S Infrastructure with Considerations for Users, Prescribers and Developers
Walter, J.S.
- Coating Stainless Steel Electrodes with Iridium for Applications in FES
- Direct Bladder Stimulation in an Animal Model: Evaluation of a New Suture Electrode
- Control of Neuralprostheses III: Self Adaptive Neuro-Fuzzy Control Using Reinforcement Learning
- The Powered Easel
- Towards Automatic Generation of Tactile Graphics
- Job Accomodation for Repetitive Strain Injury on the Automobile Assembly Line
- Direct Bladder Stimulation in an Animal Model: Evaluation of a New Suture Electrode
Williamson, R.
- Control of Neuralprostheses I: Sensor Fusion
- Control of Neuaralprostheses I: Event Detection Using Machine Learning
- Comparison of Oxygen Uptake and Physiologic Cost Index (PCI) at Submaximal Walking Velocities
- Comparison of Oxygen Uptake and Physiologic Cost Index (PCI) at Submaximal Walking Velocities
- An Integration Implementation Using an M3S Infrastructure with Considerations for Users, Prescribers, and Developers
- The Universal Trail Assessment Process
- Direct Bladder Stimulation in an Animal Model: Evaluation of a New Suture Electrode
- Designing a Short-Range Wheeled Mobility Device for Women in India
- Coating Stainless Steel Electrodes with Iridium for Application in FES